Industrial Turbo Series

VSKU:


Industrial Turbo Series model no [VAC Industrial- Turbo -Series]


Size 1 1/2 to 12 in.
Temperature Range Up to 120 °F
Flow Range 2.5 to 8,800 gpm
Pressure Range Up to 150 PSI


Introduction

The Recordall Turbo Series meters uses design features such as thrust-compensated rotor geometry, direct drive magnetic coupling, and dual outboard rotor bearings to achieve high accuracy over a broad flow range. Longer product service life is achieved at higher levels of accuracy in addition to lower meter maintenance costs. The Turbo meters are available in 1-1/2, 2, 3, 4, 6, 8, 10 and 12 inch sizes. It has corrosion-resistant assemblies with the basic components of the Recordall Turbo Series that consists of the housing and the completely removable measuring element. The meter housing and cover plate are lead-free bronze (1-1/2 to 10 inch sizes). The 12 inch meter housings are cast iron with a heat fused epoxy coating. The measuring element is constructed of high-impact strength thermoplastics. Recordall Turbo Series meters are also equipped with an integral calibration mechanism for in-line accuracy calibration. In the operation of a turbo meter, water flows through the straightening vanes and a nose cone at the inlet side of the meter so that the swirling effect of upstream piping is minimized. The water then strikes the rotor blades, causing the rotor to turn. A downstream nose cone includes straightening vanes to limit the downstream effects of flow profile distortions. Optional NPT test ports are provided for field performance testing. Motion of the rotor is transferred by means of a worm drive to a vertical shaft driving a gear set, which transmits the rotation to the meter's registration device. The direct drive magnetic coupling provides accurate flow registration during line surges, and allows the permanently sealed register to be easily removed to facilitate in-line service.

Applications of Industrial Turbo Series model no [VAC Industrial- Turbo -Series]

  1. It can be used in process or industrial

  2. It can be used in building automation

  3. It can be used in irrigation

Features of Industrial Turbo Series model no [VAC Industrial- Turbo -Series]

  • It has direct coupled turbine based on an exclusive “floating rotor” design that reduces bearing friction and associated wear and tear

  • It has low pressure loss for improved system efficiency

  • It has exceptional registration accuracy across low flow rate, normal operating flow rate and maximum continuous operation flow

  • It is permanently sealed, tamper-resistant register or encoder

  • These are compatible with Badger Meter AMR/AMI meter reading systems and other approved reading technologies

Specifications of Industrial Turbo Series model no [VAC Industrial- Turbo -Series]

  • Its size is 1 1/2 to 12 in.

  • Its working temperature range is Up to 120 °F

  • Its flow range is 2.5 to 8,800 gpm

  • Its pressure range is Up to 150 PSI

 We supply Industrial Turbo Series that can be used in various industries and applications in the United Arab Emirates. Contact us for this Industrial Turbo Series in Dubai, Abu Dhabi, Sharjah, RAK, UAQ, Ajman &  Fujairah too.