COIN® Wedge Wafer (Model NW) Flow Meter

VSKU:


COIN® Wedge Wafer (Model NW) Flow Meter model no [VAC- COIN®- Wedge- Wafer- (Model NW)- Flow Meter]

Size 1/2 to 4 in.
Temperature Range Up to 800 °F
Pressure Range Dependent on flange rating PSI
Accuracy (uncalibrated) ±3 %(calibrated) ±0.5 %



Introduction

This flow meter can be used in various applications. Its design can provide better accuracy and reliability. Its operation is very simple and easy. It has the ability to maintain the necessary square root relationship between flow rate and differential pressure for almost any type of flow. Even viscosities up to 3,000 centipoises do not affect the accuracy of the meter. The flow coefficient stays highly predictable down to the remarkably low Reynolds number of 300. It is ideal for traditionally difficult-to-meter applications such as fuel oil, wastewater, coal tar, iron ores, black liquor, and others.

Applications of COIN® Wedge Wafer (Model NW) Flow Meter model no [VAC- COIN®- Wedge- Wafer- (Model NW)- Flow Meter]

  1. It can be used in a process or industrial

  2. It can be used in refining industries

  3. It can be used in chemical metering

Features of COIN® Wedge Wafer (Model NW) Flow Meter model no [VAC- COIN®- Wedge- Wafer- (Model NW)- Flow Meter]

 

  1. It has narrow face-to-face that affords the lowest installed cost with low-pressure losses

  2. It has reduced pumping costs

  3. It can resist wear and is maintenance-free(no moving parts)

  4. It can be easily installed in any position with minimal straight pipe requirements

  5. Its turndown ratio is 10:1

  6. Its mass flow output with multivariable transmitter(accuracy ±0.5 calibrated)

  7. Its repeatability ±0.2 of readings

  8. Its Reynolds number measurement is down to 300

  9. Its high viscosity measurement is 3000 and higher

  10. It resists wears having no moving parts

  11. It has bi-directional flow measurement

  12. It can be easily installed in any position with minimal straight pipe requirements

  13. It is manufactured to ASME, ANSI B31.1, NACE MR-0175, CSA-Z299.3

  14. It has ISO-9001 certified design and fabrication

  15. It has optional RTD

Specifications of COIN® Wedge Wafer (Model NW) Flow Meter model no [VAC- COIN®- Wedge- Wafer- (Model NW)- Flow Meter]

  • Its size is   1/2 to 4 in.

  • Its working temperature range is Up to 800 °F

  • Its pressure range is Dependent on flange rating PSI

  • Its accuracy is (uncalibrated) ±3 %, (calibrated) Up to ±0.5 %

We supply this COIN® Wedge Wafer (Model NW) Flow Meter that can be used in various industries and applications in the United Arab Emirates. Contact us for this COIN® Wedge Wafer (Model NW) Flow Meter in Dubai, Abu Dhabi, Sharjah, RAK, UAQ, Ajman &  Fujairah too.