Clamp meter, Model no. VAC- BE38

VSKU:


Measurement Range: 0 to 300V

Accuracy: ±1%
Battery: 3 CR2032 3V button cells
Weight: 155g


Clamp meter to measure high levels of current

The clamp meter is an electrical device used to measure high levels of current and resistance of a given electrical system. The dimension of the clamp meter  is148 x 27 x 60 mm. It has a frequency range of AC of 40 to 400 Hz. It is provided with a 3 & ½ digit-LED display to show the measured values. It is powered by 3 CR2032 3V button cells. The measuring device falls under CAT III (300 V) category with a class IP20 protection. It has a weight of 155g with plastic housing.

Applications

  1. It is used for working in confined control cabinets.

  2. It is used to measure resistance.

  3. It is used to measure current at poorly accessible locations. 

  4. It is used for examining industrial electrical systems.

  5. It is used to measure high levels of current. 

  6. It is used as a piece of industrial equipment.

  7.  It is used to inspect industrial controls.

  8. It is used to examine residential electrical systems. 

  9. It is used for assessment of commercial HVAC systems. 

  10. It is used for the primary purpose of repairing existing systems.

  11. It is used to troubleshoot electrical systems after installation.   

  12. It is used to perform the final circuit tests.  

  13. It is used for assessment of industrial HVAC systems.

  14. It is used by electricians to supervise electrical equipment during installation.

  15. It is used for the scheduled maintenance of electrical systems to prevent danger. 

  16. It is used for troubleshooting electrical systems during a maintenance check. 

  17. It is used to examine commercial electrical systems.

Features

  1. A three and a half digit LCD display of maximum count of 1999.

  2. It has a robust housing.

  3. The clamp meter falls under CAT III 300 V category.

  4. The measurement range of alternating current varies up to 400 A.

  5. The voltage measurement value ranges up to 300 V (AC/DC).

  6. It has a resistance measurement and diode test.

  7. It has an acoustic continuity test function.

  8. It has a hold function to freeze the measured value on the screen.

  9. It is suitable for line diameters of up to 25 mm.

  10. It is an extremely cost-efficient clamp meter.

  11. It has convenient one-hand operation.

Specifications

  1. The minimum DC voltage measuring value is 0V.  

  2. The maximum DC voltage measuring value is 300V.

  3. The accuracy of the measuring value of DC voltage is ±1%.

  4. The AC voltage range has a minimum measuring value of 0V.

  5. The AC voltage range has a maximum measuring value of 300V.

  6. The accuracy of the measured value of the AC voltage is ±1.2%.

  7. The alternating current has a measuring range varying from 0 to 400A.

  8. The measured value of alternating current has an accuracy of ±3%.

  9. The maximum diameter of the conductor to measure the alternating current is 25mm.

  10. The measuring rate of the clamp meter is 3 measurements per second.

  11. The measuring range of resistance has a minimum value of  0k. 

  12.  The measuring range of resistance has a maximum value of 200k 

  13. The accuracy of the measured value of resistance is ±1.2%.

  14. A three and a half digit-LED display is provided.

  15. The measuring device falls under CAT III (300 V) category.

  16. It has a class IP20 protection.

  17. The safety standards abide by code EN 61.326.

  18. The housing material of the clamp meter is plastic.

  19. It is powered by 3 CR2032 3V button cells.

  20. The operating temperature range of the clamp meter varies from 0 to 40 °C.

  21. The storage temperature range of the clamp meter varies from-20 to 60°C.

  22. The clamp meter has a maximum humidity range of 75% r. F.

  23. The dimension of the clamp meter  is148 x 27 x 60 mm.

  24. It has a weight of 155g.

  25. The frequency range of AC: 40 to 400 Hz

We supply these Clamp meters for assessment of commercial HVAC systems in the USA, UK, Germany, France, Netherlands, Spain, Switzerland, Sweden, and other European countries. Also, we supply these Clamp meters to examine residential electrical systems in the Middle East and other Asian countries including India, Pakistan, Afghanistan, Bangladesh, Singapore, etc.

Our African offices supply these Clamp meters for troubleshooting electrical systems during a maintenance check across all African countries covering South Africa, Kenya, Nigeria, Tanzania, Rwanda, Djibouti, Morocco, Ghana, Ethiopia, Uganda, Morocco, Tunisia, Cameroon, Mauritius, Gabon, Seychelles, etc.

Our Middle East offices supply these Clamp meters to inspect industrial controls in the United Arab Emirates, Kingdom of Saudi Arabia, Qatar, Oman, Kuwait, Egypt, Lebanon, Bahrain, Libya, Iraq, Erbil, Jordan, etc.