BE16 Voltage Detector
Voltage detector, model no.VAC-BE16
Voltage detecting range: 5 – 1000V
Battery: 2 x 1.5 V, AAA
Protection type: IP20
Measuring circuit category: CAT IV (1000V)
Voltage Detector for non-contact voltage detections
Voltage detector, a device equipped with sensitivity level adjustments for required detection is now provided with alternating voltage detections ranging from 5V. With contactless voltage detection technique, the device is equipped with an LED bulb which illuminates red visual and acoustic signals on detections is now widely used by craftsmen and for conventional purposes. The device integrated with an LED torch at the tip makes it useful even in unfavourable lighting conditions.
It is used for detections of alternating voltages.
It is used for detections in broken lines of exposed cables.
They are used for detection in sockets, switches etc.
These are widely carried on in the tool kit of craftsmen.
They are used by electricians in live construction sites for quick detections.
These are for detections in varying sensitivity levels.
The device is best suited for its use even under unfavourable lighting conditions.
It is used for determining alternating voltages in cable drums, open wires, fuses, jacks etc.
The device is equipped with sensitivity level adjustments.
It can detect voltages from 5V.
It is equipped with an LED bulb which illuminates red signals.
It has an acoustic alarm function for warning.
The housing design is plastic.
The type of protection class provided is IP20.
It is equipped with an integrated LED torch at the tip.
The voltage detection ranges from 5 to 1000V.
The detection ranges from 50 to 400 Hz.
The device is of protection class CAT IV, 1000V.
The stepless adjustments are for adjusting the sensitivity levels accordingly.
The integrated LED bulb illuminates a red signal.
The acoustic alarm signal rings when there is detection.
The device is of EN 61610-1:2010, EN 61610-2-033:2012, EN 61326-1:2013 and EN 61326-2-2:2013.
The degree of pollution is 2.
The required power is supplied to the device by an internal battery of 2 x 1.5 V, AAA.
The dimension of the device is 154 x 32 x 28 mm.
It weighs 0.05kg.
The device must be operated in a surrounding condition of 0 to 40℃.
The relative humidity for operation must be 85%.
The device must have internal sensors for detecting live cables.
The package must include measuring devices, batteries and an operating manual.